Terms and conditions

Effective from 9 November 2026

1 Seller and scope

1.1 The seller is 3Dlightwork s.r.o., company ID 19524650, VAT ID CZ19524650, registered office Lažánky 55, 388 01 Blatná, entered in the Commercial Register maintained by the Regional Court in České Budějovice, section C, file 33354. Workshop: Vrbenská 1359, 388 01 Blatná. Email: info@3dlightwork.com. Telephone: +420 601 573 155. Online shop: https://www.3dlightwork.com/.

1.2 These terms govern sales through the online shop and individually negotiated orders if our quotation or contract refers to them before conclusion and the buyer has had an opportunity to read them. Individually agreed provisions take precedence. Statutory consumer rights cannot be restricted in this way.

1.3 A consumer is a natural person acting outside their business or independent professional activity. Special consumer provisions do not apply to purchases by an entrepreneur in the course of business.

1.4 Our offer may cover individual metal products, custom manufacture or supply with installation. Before concluding the contract we specify whether it covers goods, a separate service or a contract for work and what is included. Contracts for work are governed by the applicable legislation and individual contract. These terms apply only insofar as compatible with the nature of the work.

1.5 Each party bears its usual internet and telephone charges under its own tariff. We charge no special surcharge for distance communication.

2 Orders and conclusion of contract

2.1 An enquiry sent by form or email is non-binding unless its content and our quotation clearly indicate a binding order. For products offered on request, the individual quotation specifies price, scope, payment method and timing.

2.2 When using the cart, the buyer selects the goods, variant and quantity, enters contact and delivery details, and selects available shipping and payment methods. Before submitting, the buyer must be able to check and correct all details and review the total price and these terms.

2.3 By submitting an order using a button clearly indicating an obligation to pay, the buyer makes a binding offer. The contract is formed when our acceptance reaches the buyer. If an automatic email merely acknowledges receipt, we will expressly state this. Such an email does not itself constitute acceptance.

2.4 For an individual quotation the contract is formed when unconditional acceptance reaches us during its validity period, unless the quotation expressly sets a different time. Changes to price, scope, timing or other material terms require both parties’ consent. Silence does not constitute acceptance of a new offer.

2.5 We provide the consumer with confirmation of the contract, its contents, the terms and the legally required information including the withdrawal form in a text format that can be retained, normally by email. Contracts are archived electronically. On request the buyer receives a copy of their contract documents.

2.6 The original version of these terms is in Czech. Another contract language may be agreed before conclusion. If goods are unavailable or we suspect an obvious error, we will promptly contact the buyer. A concluded contract cannot be unilaterally amended or cancelled merely because the price differs from another seller’s price.

3 Price and payment

3.1 Before conclusion we state the total price including VAT and all compulsory charges, shipping and packaging costs and any installation price. A price per m² or other unit must be distinguished from the price of the entire product. For products priced on request an indicative amount is not the final order price.

3.2 The buyer may use the payment methods actually offered in the cart for that order or stated in the accepted quotation. For custom work the deposit and balance, if any, due dates, conditions for starting production and production and delivery dates are individually agreed in the quotation and must be known before conclusion. Changes in scope and additional work are not charged without prior agreement.

3.3 Deposits are credited against the agreed price and are not automatically forfeited as a penalty. If the contract ends, the deposit is settled according to law and the agreed performance. This does not affect entitlement to payment for a duly agreed and provided service or another statutory claim.

3.4 We issue the tax invoice within the statutory time limit and provide it electronically. Deposits are handled under the applicable tax rules. Issuing a deposit invoice does not itself replace agreement on the contract terms.

3.5 Unless otherwise agreed, ownership of movable goods supplied without installation passes after full payment and receipt. For products incorporated into real property, ownership and security are determined by law and the particular contract.

4 Custom manufacture and technical specifications

4.1 Before individual manufacture begins we agree in writing on dimensions, material and thickness, design and orientation, finish and colour, fixing method and scope of supply. This may include a drawing or visualisation. Approval of specifications does not limit our responsibility for professional workmanship.

4.2 If we take the measurements, we are responsible for their accuracy within the agreed scope. A buyer who supplies measurements or other specifications is responsible for their accuracy. Before production we will point out apparent unsuitability or inconsistency. Any technical changes identified must be agreed jointly.

4.3 Tolerances, design limitations and surface properties are agreed for the particular product. A visualisation does not replace a technical drawing. A warning about on-screen colour reproduction does not remove the obligation to supply the agreed material and shade.

4.4 We assess changes requested after approval for feasibility, price and timing and implement them only after agreement. Where the buyer wishes to cancel an order for which there is no statutory right of withdrawal without reason, termination and financial settlement may be agreed. This does not create an automatic right to retain the full price or deposit.

4.5 For logos, lettering or custom designs, the buyer supplies materials they are entitled to use for manufacture. Rights in designs created by the seller are agreed for the individual order. Delivery of the product does not itself transfer all rights in the design.

5 Delivery and receipt

5.1 Delivery time for metal decorations is 5–7 working days. For custom manufacture the method, place and dates of production and delivery are agreed individually and stated in the accepted quotation or order confirmation. The start of the production period must be expressly defined, for example when the agreed deposit is credited and the specifications approved. Production time is distinct from transit time. If no delivery time was agreed with a consumer, we deliver without undue delay and within 30 days of conclusion.

5.2 Available destinations and shipping methods are shown in the cart or individual quotation. For international or oversized shipments we confirm the cost and shipping conditions before conclusion. Any import charges for deliveries outside the EU must be explained before ordering.

5.3 Shipping and packaging costs are shown in the cart or individually agreed in the quotation before conclusion. Shipping is not free. A surcharge not disclosed beforehand may not be added after the order. For collection the buyer collects the product after notification that it is ready.

5.4 On receipt we recommend checking the packaging, recording visible damage with the carrier and notifying us. Failure to inspect, missing photographs or an unsigned damage report do not in themselves deprive consumers of rights in respect of defects.

5.5 For consumers the risk of damage passes on receipt by the buyer or their designated person other than the carrier. If the consumer selects a carrier we did not offer, the statutory exception concerning handover to that carrier applies.

5.6 Failure to take delivery is not in itself withdrawal. Any repeat delivery, storage or termination is dealt with under the law and the individual agreement. We do not charge an unspecified flat-rate penalty of 100% of the price. We notify the buyer of delivery delays. Their statutory rights are unaffected.

6 Installation and project execution

6.1 Installation, surveying, transport of equipment, foundations, building alterations, electrical work, automatic drives and other work are included only to the extent expressly stated in the quotation or contract. A product label on the website does not replace the itemised scope of the project.

6.2 We agree site readiness, access, buyer cooperation and any necessary documents in advance. If conditions differ from those agreed or technical changes are needed, the impact on scope, price and timing is agreed before proceeding. Work requiring special authorisation must be carried out by an authorised person.

6.3 On completion of an installation we prepare a handover record listing scope, instructions supplied, defects identified and agreed remedies. Signing for receipt or paying the price does not waive the buyer’s statutory rights.

6.4 A consumer’s request to begin a separate service during the withdrawal period must be express. Merely accepting these terms does not suffice. Section 9 governs proportional payment and any loss of the right to withdraw.

7 Gift vouchers

7.1 A voucher may be purchased for a listed value or an individually agreed amount and delivered by online or postal mail as selected. It is valid for 12 months from issue. The specific expiry date appears on the voucher.

7.2 A voucher is redeemable once for goods at 3DLightwork.com. A higher price may be topped up. If the purchase costs less, the unused balance is neither paid out nor carried forward. Vouchers cannot be used to buy other gift vouchers.

7.3 Ordinary redemption rules do not restrict the consumer’s statutory right to withdraw from the purchase of the voucher. Delivery by email alone does not automatically forfeit this right. When goods paid for with a voucher are returned under a statutory right, the corresponding value is refunded as a voucher and any monetary top-up by the original method, unless otherwise agreed without additional cost to the consumer.

8 Rights in respect of defects

8.1 We are responsible for goods meeting the agreed and statutory requirements upon receipt. In particular they must match the description, quantity, material, dimensions and agreed purpose, come with necessary accessories and instructions, and provide customary quality and safety. Our responsibility includes faulty installation we undertook under the contract.

8.2 Consumers may report defects appearing within two years of receipt. A defect appearing within one year is presumed to have existed on receipt unless the nature of the goods or the defect precludes this. Statutory rights differ from voluntary quality guarantees. A longer guarantee applies only if and to the extent granted.

8.3 Consumers may request repair or replacement unless their choice is impossible or disproportionately expensive compared with the other remedy. Under the statutory conditions they may request a proportionate reduction or withdraw, in particular if we refuse to remedy the defect, fail to remedy it properly, the defect recurs or there is a material breach. A minor defect gives no right to withdraw.

8.4 Claims can be made by email to info@3dlightwork.com, in writing or in person at our registered office, Lažánky 55, 388 01 Blatná. The buyer identifies the goods or work, the symptoms, their contact details and requested remedy. Other reliable evidence of purchase is accepted. Our form is optional and original packaging is not required.

8.5 We issue written confirmation of the date, claim contents, remedy requested and contact details. Consumer claims, including remedying the defect and notifying the consumer, are completed within 30 days of the claim unless a longer period is agreed in the individual case. We issue confirmation of resolution or written reasons for rejection. If the deadline expires without resolution, the consumer may withdraw or request a proportionate reduction.

8.6 For justified claims we reimburse reasonably incurred costs as provided by law. We collect the item for repair at our expense. If remedy requires removing and reinstalling goods installed in accordance with their nature and purpose before the defect appeared, we arrange this or pay the statutory costs. For installed products we first agree on safe inspection and remedial arrangements.

8.7 Liability excludes normal wear and defects caused by the buyer. Incorrect maintenance or third-party intervention does not automatically justify rejecting every claim. Its relationship to the specific defect is assessed. Buyers of custom-made goods also retain defect rights.

8.8 Business buyers’ rights and rights relating to defects in work are governed by the relevant Civil Code provisions and the individual contract. Business buyers must report defects without undue delay within the statutory periods. These terms impose no blanket three-day exclusion for hidden defects.

9 Consumer withdrawal without giving a reason

9.1 For distance or off-premises contracts consumers may withdraw within 14 days without giving a reason unless a statutory exception applies. For goods the period runs from receipt, for multiple goods from one order delivered separately from receipt of the last item, for delivery in parts from receipt of the last part, and for regular deliveries from the first delivery. For services it starts on conclusion. A special 30-day period applies to unsolicited home visits or organised sales events as defined by law.

9.2 It is sufficient to send an unequivocal notice in time to info@3dlightwork.com or our registered office. The form in Annex 1 is optional. Consumers need neither give a reason nor obtain prior approval. We acknowledge electronic notices without undue delay.

9.3 Consumers must dispatch or hand over the goods without undue delay and within 14 days of withdrawal. Return address: 3Dlightwork s.r.o., Lažánky 55, 388 01 Blatná. For bulky goods we recommend arranging safe handover in advance. This is not a condition of valid withdrawal.

9.4 Consumers bear direct return costs if duly informed in advance, unless the law or our agreement provides otherwise. If normal postal return is impossible, before conclusion we state the individual cost of return transport based on shipment dimensions and collection location. This rule concerns withdrawal without reason. For justified defect claims we pay reasonably incurred costs under section 8.6. For an off-premises contract as defined by law where such goods were delivered to the home at the time of conclusion, we arrange collection at our expense.

9.5 We refund payments received, including the cost of the least expensive standard delivery offered, without undue delay and within 14 days of withdrawal, using the original payment method unless the consumer agrees to another at no extra cost. Unless we offered to collect, we may withhold reimbursement until we receive the goods or evidence of dispatch, whichever occurs first.

9.6 Consumers are liable only for loss in value caused by handling beyond that needed to establish the nature, characteristics and functioning of the goods. We charge no flat withdrawal or restocking fee. Missing original packaging does not automatically cancel the right of withdrawal.

9.7 The right to withdraw without reason does not arise, in particular, for goods genuinely made to the consumer’s individual specifications or tailored to personal needs under section 1837(d) of the Czech Civil Code, for example non-standard dimensions or an individual personal motif. Choosing a standard size, colour or motif from preset options or merely labelling an item “custom-made” does not automatically create this exception. We disclose the specific exception before conclusion. Defect rights remain unaffected.

9.8 For a separate service we begin during the withdrawal period only at the consumer’s express request and after the statutory information has been provided. If the consumer then withdraws before full performance, a proportionate part of the agreed price is payable if the statutory conditions are met. The right expires on full performance only if all statutory conditions are met, in particular prior express consent and information. General acceptance of the terms is insufficient.

9.9 Withdrawal due to defects, delay or other breach and related reimbursement of costs are assessed separately under the law. Restrictions applying solely to withdrawal without reason do not automatically apply.

10 Personal data and reviews

10.1 Information on data processing is available at https://www.3dlightwork.com/en/ochrana-osobnich-udaju/. Acceptance of these terms is not consent to advertising.

10.2 Where the shop publishes consumer reviews, we must state directly alongside them or via a clear link whether and how we verify that they come from real customers. A review that has not been verified in this way must not be described as verified.

11 Complaints and alternative dispute resolution

11.1 We accept complaints at info@3dlightwork.com and inform the buyer of the outcome. The buyer may still contact the competent supervisory authority or court.

11.2 The competent alternative dispute resolution body for consumer disputes concerning sales and services is the Czech Trade Inspection Authority, Central Inspectorate, ADR Department, Gorazdova 1969/24, 120 00 Praha 2, email adr@coi.gov.cz. Information: https://coi.gov.cz/informace-o-adr/.

11.3 Consumers may apply for ADR within one year of first asserting the disputed right against the seller. The European ODR platform has ceased operations and is not offered as a dispute resolution channel under these terms.

12 Final provisions

12.1 The contract is governed by Czech law. Consumers habitually resident in another country retain the protection of the mandatory provisions applicable under the relevant conflict-of-law rules.

12.2 The terms accepted on conclusion apply to the contract. Later amendments do not themselves alter an existing contract. Changes to a specific order require agreement by both parties.

12.3 Statutory rights and liability cannot be restricted by a general reference to force majeure, maintenance, carriers or subcontractors. If performance is impeded we inform the buyer and address the consequences under the law and the individual contract.

12.4 The annexes contain a model withdrawal form and an optional defect claim form. These terms take effect on 9 November 2026.

Annex 1 – Withdrawal form

Complete and send this form only if you wish to withdraw. Use of the form is optional. You need not give a reason or sign when sending by email.

To: 3Dlightwork s.r.o., Lažánky 55, 388 01 Blatná
Email: info@3dlightwork.com

I hereby give notice that I withdraw from the contract for the purchase of the following goods or the provision of the following service:

Goods or service:
__________________________________________________________________________

Order number or other contract reference:
__________________________________________________________________________

Date of order and date goods received:
__________________________________________________________________________

Consumer’s full name:
__________________________________________________________________________

Consumer’s address:
__________________________________________________________________________

Email for acknowledgement:
__________________________________________________________________________

Date of notice:
__________________________________________________________________________

Consumer’s signature, only if sent on paper:
__________________________________________________________________________

We will refund using the original payment method unless otherwise agreed at no extra cost. Providing an account number is not a condition of valid withdrawal.

Annex 2 – Optional defect claim form

To: 3Dlightwork s.r.o., Lažánky 55, 388 01 Blatná
Email: info@3dlightwork.com
Address for goods subject to a claim: Lažánky 55, 388 01 Blatná

The form helps describe the defect. Neither the form nor original packaging is required to make a claim. For installed or oversized products, describe the fault and installation location so that we can arrange an appropriate inspection.

Full name or company name:
__________________________________________________________________________

Address and contact details for handling the claim:
__________________________________________________________________________

Order number or other proof of purchase:
__________________________________________________________________________

Product or work concerned and date of receipt:
__________________________________________________________________________

Description of defect and when it appeared:
__________________________________________________________________________

Remedy requested:
__________________________________________________________________________

Attachments, for example photographs or a copy of the receipt:
__________________________________________________________________________

Date of claim:
__________________________________________________________________________

On receipt of the claim we issue a separate acknowledgement with the legally required particulars. We subsequently confirm the outcome and date of resolution or provide written reasons for rejection.